Product Details:
Response Time | T90 < 40 Seconds |
Accuracy | + /- 0.1 ppm below 1 ppm : + /- 0.2 ppm above 1 ppm + /- 1% 0f reading |
Wetted Material | PVC or SS body |
Measurement Range | 0-20 ppm, 0-200% Saturation |
Resolution | : 0.1 ppm |
Salinity Compensation | Provided |
Input Power | 24VDC |
Sensor Cable | 6 mtr. (optional cable length available up to 100 Meters) |
Connections | 1"NPT(M) front and back fittings |
· Affordable as you do not have to rely on any specific controllers.
· 4-20mA output from sensor enables seamless connectivity to field transmitters or PLC/DCS.
· No electrolyte solution to replenish.
· Replaceable sensor cap.
· No calibration or replacement sensor cap for at least 1 year in most applications.
· Saltwater compensation.
· Sample flow not necessary for measurement accuracy.
· The sensor come with a choice of PVC body or SS 316 body version.
Sensor cable length up to 100 meters allow flexibility in the field.Product Details:
Response Time | T90 < 40 Seconds |
Accuracy | + /- 0.1 ppm below 1 ppm : + /- 0.2 ppm above 1 ppm + /- 1% 0f reading |
Wetted Material | PVC or SS body |
Measurement Range | 0-20 ppm, 0-200% Saturation |
Resolution | 0.1 ppm |
Salinity Compensation | Provided |
Input Power | 24VDC |
Sensor Cable | 6 mtr. (optional cable length available up to 100 Meters) |
Connections | 1"NPT(M) front and back fittings |
Potence Controls Optical Dissolved Oxygen sensors measure Dissolved Oxygen with great accuracy in waste water plants. They can connect to any existing measurement systems that accept a 4-20 mA input. This feature reduces the loop cost drastically as you can use any off the shelf Indicator and configure to measure Dissolved Oxygen.
Product Details:
Measuring range | 0 to 1000 ug/l O2 display up to 20000 ug/l separated in 3 measuring ranges |
Measurement error | < 1 % related to the measured value or minimum +- 0.5 ug/l |
Detection limit | 0.2 ug/l |
Resolution | 0.01 ug/l, adjustable |
Response time | t 90 < 8 s |
Calibration | manual and automatic calibration with self test, possible in three areas |
Data logger | 2000 data sets in a continuous data logger |
Sample Pressure | 0 to 8 bar pressure peaks up to 16 bar |
Sample temperature | 0 to 60 DegreeC automatically compensated |
Interface | USB 2.0, optional Touch Memory (1-wire) |
Product Details:
Measuring range | 0 to 1000 ug/l O2 display up to 20000 ug/l separated in 3 measuring ranges |
Measurement error | < 1 % related to the measured value or minimum +- 0.5 ug/l |
Detection limit | 0.2 ug/l |
Resolution | 0.01 ug/l, adjustable |
Response time | t 90 < 8 s |
Calibration | manual and automatic calibration with self test, possible in three areas |
Data logger | 2000 data sets in a continuous data logger |
Sample Pressure | 0 to 8 bar pressure peaks up to 16 bar |
Sample temperature | 0 to 60 DegreeC automatically compensated |
Interface | USB 2.0, optional Touch Memory (1-wire) |
Product Details:
Brand | Potence |
Display Type | Seven Segment LED Display |
Analog Output | 4-20 mA ; Max. Load 600 Ohms |
Power Requirements | 90- 270 VAC ; 50 / 60 Hz |
Analog Output Signal | 4-20 mA ; Max. Load 600 Ohms |
Analog Output Function | Retransmission |
Relays | Electromechanical SPDT ; 10A ; 115 / 230 VAC |
Relays Operational Mode | Control |
Enclosure | ABS |
Enclosure Rating | IP 54 |
Enclosure Dimension | H*W*D ( 48*96*75 ) mm |
Cut-Out | 44*92 mm |
Wetted Material | PVC or SS body |
Potence Controls PCODOS Optical Dissolved Oxygen System is an excellent choice for an accurate measure in all situation with wide range of applications like Urban wastewater treatment; Industrial effluent treatment. Surface water monitoring , Sea water monitoring, Fish farming, Aquarium and Drinking water. The Optical Dissolved Oxygen sensor is based on Luminescent optical technology.
Without calibration requirements with ultra-low power technology, the Optical Dissolved Oxygen sensor meets the demands of field works. The “smart” Optical Dissolved Oxygen sensor stores calibration and history data within the sensor. This allows you a “plug and play” system.
Product Details:
Measuring range | 0 to 1000 ug/l O2 display up to 20000 ug/l separated in 3 measuring ranges |
Measurement error | < 1 % related to the measured value or minimum +- 0.5 ug/l |
Detection limit | 0.2 ug/l |
Resolution | 0.01 ug/l, adjustable |
Response time | t 90 < 8 s |
Calibration | manual and automatic calibration with self test, possible in three areas |
Data logger | 2000 data sets in a continuous data logger |
Sample Pressure | 0 to 8 bar pressure peaks up to 16 bar |
Sample temperature | 0 to 60 DegreeC automatically compensated |
Interface | USB 2.0, optional Touch Memory (1-wire) |
Product Details:
Wetted Material | PVC or SS body |
Measurement Range | 0-20 ppm, 0-200% Saturation |
Accuracy | + /- 0.1 ppm below 1 ppm : + /- 0.2 ppm above 1 ppm + /- 1% 0f reading |
Resolution | 0.1 ppm |
Response Time | T90 < 40 Seconds |
Salinity Compensation | Provided |
Input Power | 24VDC |
Sensor Cable | 6 mtr. (optional cable length available up to 100 Meters) |
Connections | 1"NPT(M) front and back fittings |
Potence Controls Optical Dissolved Oxygen sensors measure Dissolved Oxygen with great accuracy in waste water plants.They can connect to any existing measurement systems that accept a 4-20 mA input. This feature reduces the loop cost drastically as you can use any off the shelf Indicator and configure to measure Dissolved Oxygen.
· Affordable as you do not have to rely on any specific controllers.
· 4-20mA output from sensor enables seamless connectivity to field transmitters or PLC/DCS.
· No electrolyte solution to replenish.
· Replaceable sensor cap.
· No calibration or replacement sensor cap for at least 1 year in most applications.
· Saltwater compensation.
· Sample flow not necessary for measurement accuracy.
· The sensor come with a choice of PVC body or SS 316 body version.
Sensor cable length up to 100 meters allow flexibility in the fieldProduct Details:
Measuring Range | 0-20 ppm,0-200% Saturation |
Brand | Potence |
Application | Industrial |
Detection Principle | luminescent quenching |
Response Time | 90% value in less than 60 seconds |
Operating Temperature | - 5 to 50 Degree C |
Accuracy | +- 0.5 % |
Sensor Cable | Standard 15 Meter |
Body Material | PVC Or SS Body |
Communication | Modbus RS 485 |
Output Signal | 4-20 mA |
Measurement Principle | Luminescent optical technology |
Measurement Range | 0.00 to 20.00 mg/l or 0.00 to 20.00 ppm or 0.0 to 200 % |
Wetted, Body Material | SS (316L) / Titanium Body |
Resolution | 0.01 mg/l or ppm |
Working Temp | 0 to 50 DegreeC |
Max. Pressure | 5 Bar |
Measurement | : 2 Nos. ; Digital Sensor Inputs |
Display | Backlit LCD Screen 4*20 Characters ; 5 Directional Keys |
Power Requirements | 110 VAC / 230 VAC ; +- 10% ; 50 / 60 Hz |
Operating Conditions | -20 to 55 DegreeC |
Storage Conditions | -20 to 65 DegreeC |
Analog Output Signal | 2 Nos. ; 0 / 4-20 mA Isolated ; Max. Load 500 Ohms. |
Relays | 3 Nos. ; Electromechanical SPST ; 6 A ; 250 VAC Max. |
Memory | Battery Back up |
Calibration Methods | 2 Point Calibration |
Controller Type | P, PI and ON/OFF Controller |
Digital Inputs | 2 Nos. ; For Pulse Input or Switching Input |
Digital Outputs | 2 Nos. ; Dry Contact Potential Free ; 12 V ; 200 mA |
Enclosure | IP 65 |
Enclosure Mounting | Wall, Panel |
Product Details:
Response Time | t 90 < 8 s |
Data Logger | 2000 data sets in a continuous data logger |
Detection Limit | 0.2 ug/l |
Measurement | 0 to 1000 ug/l O2 display up to 20000 ug/l separated in 3 measuring ranges |
Measurement error | < 1 % related to the measured value or minimum +- 0.5 ug/l |
Resolution | 0.01 ug/l, adjustable |
Calibration | manual and automatic calibration with self test, possible in three areas |
Sample Pressure | 0 to 8 bar pressure peaks up to 16 bar |
Sample temperature | 0 to 60 DegreeC automatically compensated |
Interface | USB 2.0, optional Touch Memory (1-wire) |
Product Details:
Measuring Range | 0 to 1000 ug/l O2 display up to 20000 ug/l separated in 3 measuring ranges |
Response Time | t 90 < 8 s |
Measurement error | < 1 % related to the measured value or minimum +- 0.5 ug/l |
Detection limit | 0.2 ug/l |
Resolution | 0.01 ug/l, adjustable |
Calibration | manual and automatic calibration with self test, possible in three areas |
Data logger | 2000 data sets in a continuous data logger |
Sample Pressure | 0 to 8 bar pressure peaks up to 16 bar |
Sample temperature | 0 to 60 DegreeC automatically compensated |
Interface | USB 2.0, optional Touch Memory (1-wire) |
Product Details:
Brand | Potence |
Measurement | 2 Nos. ; Digital Sensor Inputs |
Display | Backlit LCD Screen 4*20 Characters ; 5 Directional Keys |
Power Requirements | 110 VAC / 230 VAC ; +- 10% ; 50 / 60 Hz |
Operating Conditions | : -20 to 55 DegreeC |
Storage Conditions | -20 to 65 DegreeC |
Analog Output Signal | 2 Nos. ; 0 / 4-20 mA Isolated ; Max. Load 500 Ohms. |
Relays | 3 Nos. ; Electromechanical SPST ; 6 A ; 250 VAC Max. |
Memory | Battery Back up |
Calibration Methods | 2 Point Calibration |
Controller Type | P, PI and ON/OFF Controller |
Digital Inputs | : 2 Nos. ; For Pulse Input or Switching Input |
Digital Outputs | 2 Nos. ; Dry Contact Potential Free ; 12 V ; 200 mA |
Enclosure | IP 65 |
Enclosure Mounting | Wall, Panel |
Potence Controls PCODOS Optical Dissolved Oxygen System is an excellent choice for an accurate measure in all situation with wide range of applications like Urban wastewater treatment; Industrial effluent treatment. Surface water monitoring , Sea water monitoring, Fish farming, Aquarium and Drinking water. The Optical Dissolved Oxygen sensor is based on Luminescent optical technology.
Without calibration requirements with ultra-low power technology, the Optical Dissolved Oxygen sensor meets the demands of field works. The “smart” Optical Dissolved Oxygen sensor stores calibration and history data within the sensor. This allows you a “plug and play” system.
· Optical Technology without calibration
· NO drift, Reduced Maintenance
· Stainless Steel (316L) or Titanium Body for Corrosive Applications
· Robust and Waterproof (IP 68)
· Controller with two digital sensor inputs.
· Backlit Display
· Password Protected Access
· Real time clock with Battery backup.