Dust Monitor

Product Details:

The DUSTHUNTER SP100 is a type-approved measuring device with probe for very low to medium dust concentrations. Installation from one side makes it ideal for thick-walled or double-walled ducts. The measurement is based on the forward scattering of light. An automated check of the zero and reference point as well as a contamination check are on board in the device.

Product Details:

The DUSTHUNTER C200 is a type-approved measuring device which combines the advantages of the measuring principles of transmittance and forward scattered light. It is, therefore, ideal for measuring very low to high dust concentrations. Automatic self-alignment optimizes the position of the measuring beam and prevents incorrect measurement. An automated check of the zero and reference point as well as a contamination check are on board in the device.

• Combination of transmittance and scattered light measurement
• For very low to high dust concentrations
• Automatic check of zero and reference point
• Contamination monitoring and compensation on both sides
• Automatic self-alignment
• For medium to large duct diameters
• Accessories

Product Details:

The DUSTHUNTER C200 is a type-approved measuring device which combines the advantages of the measuring principles of transmittance and forward scattered light. It is, therefore, ideal for measuring very low to high dust concentrations. Automatic self-alignment optimizes the position of the measuring beam and prevents incorrect measurement. An automated check of the zero and reference point as well as a contamination check are on board in the device.

• Combination of transmittance and scattered light measurement
• For very low to high dust concentrations
• Automatic check of zero and reference point
• Contamination monitoring and compensation on both sides
• Automatic self-alignment
• For medium to large duct diameters

Product Details:

The FWE200DH dust measuring device is designed to continuously measure dust concentrations in wet flue gas. The gas is extracted via a gas sampling probe and heated above the dew point. Droplets in the gas are vaporized, making it impossible for them to falsify the measurement results. The highly sensitive scattered light measurement principle enables accurate measurements even at low dust concentrations.
The FWE200DH meets the requirements of EN 14181 and EN 15267.

• For very low to medium dust concentrations
• Gas sampling and return combined in one probe
• Contamination check
• Automatic monitoring of zero and reference point
• Easy parameterization and convenient operation – optionally via supplemental remote unit
• Integrated system diagnostics for early detection of maintenance requirements

Product Details:

The FWE200DH dust measuring device is designed to continuously measure dust concentrations in wet flue gas. The gas is extracted via a gas sampling probe and heated above the dew point. Droplets in the gas are vaporized, making it impossible for them to falsify the measurement results. The highly sensitive scattered light measurement principle enables accurate measurements even at low dust concentrations.
The FWE200DH meets the requirements of EN 14181 and EN 15267.

• For very low to medium dust concentrations
• Gas sampling and return combined in one probe
• Contamination check
• Automatic monitoring of zero and reference point
• Easy parameterization and convenient operation – optionally via supplemental remote unit
• Integrated system diagnostics for early detection of maintenance requirements

Product Details:

The DUSTHUNTER SP30 is a measuring device which reliably detects very low to high dust content. The measurement is based on the forward scattering of light and is independent of the gas velocity and particle charge. The automated monitoring of the zero and reference point ensures a high level of accuracy. Thanks to its compact design, the DUSTHUNTER SP30 is available as an independent measuring device but also with an integrated purge air unit and MCU control unit for additional functions as an option. The installation is carried out on one side of a duct, whereby several mounting options and probe lengths are available. The measuring device is highly versatile, e.g., for process optimization or intelligent filter diagnostics and monitoring.

Product Details:

The DUSTHUNTER SP30 is a measuring device which reliably detects very low to high dust content. The measurement is based on the forward scattering of light and is independent of the gas velocity and particle charge. The automated monitoring of the zero and reference point ensures a high level of accuracy. Thanks to its compact design, the DUSTHUNTER SP30 is available as an independent measuring device but also with an integrated purge air unit and MCU control unit for additional functions as an option. The installation is carried out on one side of a duct, whereby several mounting options and probe lengths are available. The measuring device is highly versatile, e.g., for process optimization or intelligent filter diagnostics and monitoring.

Product Details:

The DUSTHUNTER SP30 is a measuring device which reliably detects very low to high dust content. The measurement is based on the forward scattering of light and is independent of the gas velocity and particle charge. The automated monitoring of the zero and reference point ensures a high level of accuracy. Thanks to its compact design, the DUSTHUNTER SP30 is available as an independent measuring device but also with an integrated purge air unit and MCU control unit for additional functions as an option. The installation is carried out on one side of a duct, whereby several mounting options and probe lengths are available. The measuring device is highly versatile, e.g., for process optimization or intelligent filter diagnostics and monitoring.

Product Details:

The DUSTHUNTER SP30 is a measuring device which reliably detects very low to high dust content. The measurement is based on the forward scattering of light and is independent of the gas velocity and particle charge. The automated monitoring of the zero and reference point ensures a high level of accuracy. Thanks to its compact design, the DUSTHUNTER SP30 is available as an independent measuring device but also with an integrated purge air unit and MCU control unit for additional functions as an option. The installation is carried out on one side of a duct, whereby several mounting options and probe lengths are available. The measuring device is highly versatile, e.g., for process optimization or intelligent filter diagnostics and monitoring

Product Details:

The DUSTHUNTER SP30 is a measuring device which reliably detects very low to high dust content. The measurement is based on the forward scattering of light and is independent of the gas velocity and particle charge. The automated monitoring of the zero and reference point ensures a high level of accuracy. Thanks to its compact design, the DUSTHUNTER SP30 is available as an independent measuring device but also with an integrated purge air unit and MCU control unit for additional functions as an option. The installation is carried out on one side of a duct, whereby several mounting options and probe lengths are available. The measuring device is highly versatile, e.g., for process optimization or intelligent filter diagnostics and monitoring.

Product Details:

The DUSTHUNTER SP100 is a type-approved measuring device with probe for very low to medium dust concentrations. Installation from one side makes it ideal for thick-walled or double-walled ducts. The measurement is based on the forward scattering of light. An automated check of the zero and reference point as well as a contamination check are on board in the device.

Product Details:

The DUSTHUNTER SP100 is a type-approved measuring device with probe for very low to medium dust concentrations. Installation from one side makes it ideal for thick-walled or double-walled ducts. The measurement is based on the forward scattering of light. An automated check of the zero and reference point as well as a contamination check are on board in the device.

Product Details:

The DUSTHUNTER SP100 is a type-approved measuring device with probe for very low to medium dust concentrations. Installation from one side makes it ideal for thick-walled or double-walled ducts. The measurement is based on the forward scattering of light. An automated check of the zero and reference point as well as a contamination check are on board in the device.

Product Details:

The DUSTHUNTER C200 is a type-approved measuring device which combines the advantages of the measuring principles of transmittance and forward scattered light. It is, therefore, ideal for measuring very low to high dust concentrations. Automatic self-alignment optimizes the position of the measuring beam and prevents incorrect measurement. An automated check of the zero and reference point as well as a contamination check are on board in the device.

• Combination of transmittance and scattered light measurement
• For very low to high dust concentrations
• Automatic check of zero and reference point
• Contamination monitoring and compensation on both sides
• Automatic self-alignment
• For medium to large duct diameters

Product Details:

The DUSTHUNTER C200 is a type-approved measuring device which combines the advantages of the measuring principles of transmittance and forward scattered light. It is, therefore, ideal for measuring very low to high dust concentrations. Automatic self-alignment optimizes the position of the measuring beam and prevents incorrect measurement. An automated check of the zero and reference point as well as a contamination check are on board in the device.

• Combination of transmittance and scattered light measurement
• For very low to high dust concentrations
• Automatic check of zero and reference point
• Contamination monitoring and compensation on both sides
• Automatic self-alignment
• For medium to large duct diameters

Product Details:

The FWE200DH dust measuring device is designed to continuously measure dust concentrations in wet flue gas. The gas is extracted via a gas sampling probe and heated above the dew point. Droplets in the gas are vaporized, making it impossible for them to falsify the measurement results. The highly sensitive scattered light measurement principle enables accurate measurements even at low dust concentrations.
The FWE200DH meets the requirements of EN 14181 and EN 15267.

• For very low to medium dust concentrations
• Gas sampling and return combined in one probe
• Contamination check
• Automatic monitoring of zero and reference point
• Easy parameterization and convenient operation – optionally via supplemental remote unit
• Integrated system diagnostics for early detection of maintenance requirements

Product Details:

The FWE200DH dust measuring device is designed to continuously measure dust concentrations in wet flue gas. The gas is extracted via a gas sampling probe and heated above the dew point. Droplets in the gas are vaporized, making it impossible for them to falsify the measurement results. The highly sensitive scattered light measurement principle enables accurate measurements even at low dust concentrations.
The FWE200DH meets the requirements of EN 14181 and EN 15267.

• For very low to medium dust concentrations
• Gas sampling and return combined in one probe
• Contamination check
• Automatic monitoring of zero and reference point
• Easy parameterization and convenient operation – optionally via supplemental remote unit
• Integrated system diagnostics for early detection of maintenance requirements

Product Details:

The FWE200DH dust measuring device is designed to continuously measure dust concentrations in wet flue gas. The gas is extracted via a gas sampling probe and heated above the dew point. Droplets in the gas are vaporized, making it impossible for them to falsify the measurement results. The highly sensitive scattered light measurement principle enables accurate measurements even at low dust concentrations.
The FWE200DH meets the requirements of EN 14181 and EN 15267.

• For very low to medium dust concentrations
• Gas sampling and return combined in one probe
• Contamination check
• Automatic monitoring of zero and reference point
• Easy parameterization and convenient operation – optionally via supplemental remote unit
• Integrated system diagnostics for early detection of maintenance requirements

Product Details:

The DUSTHUNTER T200 is a measuring device for dust at medium to high concentrations. Basic measuring value is transmittance. Opacity and extinction can be calculated and displayed as well as the dust concentration after gravimetric calibration. Furthermore, it has an integrated contamination check of the sender/receiver and reflector unit as well as an automatic self-alignment of the optical assembly. The DUSTHUNTER T200 is approved according to EN 15267.

• Integrated contamination check for sender/receiver and reflector unit
• Automatic self-alignment of the optical assembly
• Automatic check of zero and reference point
• For medium to high dust concentrations
• For small to large measuring distance.

Product Details:

The DUSTHUNTER T200 is a measuring device for dust at medium to high concentrations. Basic measuring value is transmittance. Opacity and extinction can be calculated and displayed as well as the dust concentration after gravimetric calibration. Furthermore, it has an integrated contamination check of the sender/receiver and reflector unit as well as an automatic self-alignment of the optical assembly. The DUSTHUNTER T200 is approved according to EN 15267.

• Integrated contamination check for sender/receiver and reflector unit
• Automatic self-alignment of the optical assembly
• Automatic check of zero and reference point
• For medium to high dust concentrations
• For small to large measuring distances

Product Details:

The DUSTHUNTER T200 is a measuring device for dust at medium to high concentrations. Basic measuring value is transmittance. Opacity and extinction can be calculated and displayed as well as the dust concentration after gravimetric calibration. Furthermore, it has an integrated contamination check of the sender/receiver and reflector unit as well as an automatic self-alignment of the optical assembly. The DUSTHUNTER T200 is approved according to EN 15267.

• Integrated contamination check for sender/receiver and reflector unit
• Automatic self-alignment of the optical assembly
• Automatic check of zero and reference point
• For medium to high dust concentrations
• For small to large measuring distances

Product Details:

The DUSTHUNTER T200 is a measuring device for dust at medium to high concentrations. Basic measuring value is transmittance. Opacity and extinction can be calculated and displayed as well as the dust concentration after gravimetric calibration. Furthermore, it has an integrated contamination check of the sender/receiver and reflector unit as well as an automatic self-alignment of the optical assembly. The DUSTHUNTER T200 is approved according to EN 15267.

• Integrated contamination check for sender/receiver and reflector unit
• Automatic self-alignment of the optical assembly
• Automatic check of zero and reference point
• For medium to high dust concentrations
• For small to large measuring distances

Product Details:

The DUSTHUNTER T200 is a measuring device for dust at medium to high concentrations. Basic measuring value is transmittance. Opacity and extinction can be calculated and displayed as well as the dust concentration after gravimetric calibration. Furthermore, it has an integrated contamination check of the sender/receiver and reflector unit as well as an automatic self-alignment of the optical assembly. The DUSTHUNTER T200 is approved according to EN 15267.

• Integrated contamination check for sender/receiver and reflector unit
• Automatic self-alignment of the optical assembly
• Automatic check of zero and reference point
• For medium to high dust concentrations
• For small to large measuring distances

Product Details:

The DUSTHUNTER T200 is a measuring device for dust at medium to high concentrations. Basic measuring value is transmittance. Opacity and extinction can be calculated and displayed as well as the dust concentration after gravimetric calibration. Furthermore, it has an integrated contamination check of the sender/receiver and reflector unit as well as an automatic self-alignment of the optical assembly. The DUSTHUNTER T200 is approved according to EN 15267.

• Integrated contamination check for sender/receiver and reflector unit
• Automatic self-alignment of the optical assembly
• Automatic check of zero and reference point
• For medium to high dust concentrations
• For small to large measuring distances

Product Details:

The DUSTHUNTER T200 is a measuring device for dust at medium to high concentrations. Basic measuring value is transmittance. Opacity and extinction can be calculated and displayed as well as the dust concentration after gravimetric calibration. Furthermore, it has an integrated contamination check of the sender/receiver and reflector unit as well as an automatic self-alignment of the optical assembly. The DUSTHUNTER T200 is approved according to EN 15267.

• Integrated contamination check for sender/receiver and reflector unit
• Automatic self-alignment of the optical assembly
• Automatic check of zero and reference point
• For medium to high dust concentrations
• For small to large measuring distances

Product Details:

The FWE200DH dust measuring device is designed to continuously measure dust concentrations in wet flue gas. The gas is extracted via a gas sampling probe and heated above the dew point. Droplets in the gas are vaporized, making it impossible for them to falsify the measurement results. The highly sensitive scattered light measurement principle enables accurate measurements even at low dust concentrations.
The FWE200DH meets the requirements of EN 14181 and EN 15267.

• For very low to medium dust concentrations
• Gas sampling and return combined in one probe
• Contamination check
• Automatic monitoring of zero and reference point
• Easy parameterization and convenient operation – optionally via supplemental remote unit
• Integrated system diagnostics for early detection of maintenance requirements