Gas Analyzers

Product Details:

The EC96 Enables continuous monitoring of the oxygen level within confined rooms and work areas. Adjustable alarm contacts give early warning of changes in oxygen levels, allowing action to be taken. The EC96 O2 Deficiency Monitor transmits continuous oxygen concentration level to any control data acquistion System or programmable logic controller with 4-20mA

Additional Information:

• Item Code: EC91

Product Details:

Measurement of Oxygen gas Feed to Furnace, Boilers or any other clean gas application. 

Product Details:

The EC96 enables continuous monitoring of the oxygen level within confined rooms and work areas. Adjustable alarm contacts give early warning of changes in oxygen levels, allowing action to be taken. The EC96 O2 Deficiency Monitor transmits continuous oxygen concentration level to any control data acquisition system or programmable logic controller with 4-20mA input.
Supplied with 25 metres of cable as standard, allowing the cell to be mounted remotely, if required.
The EC96 incorporates diffusion type electrochemical sensor that does not require sample pumping making it easy to use and calibrate.

Description:

• Range: Range 0-30% oxygen
• Sensor life in excess of 3 years applications
• 4-20mA output for remote monitoring
• 90% of reading within 20 seconds
• Waterproof IP65 rated enclosure
• Simple installation & 3 years warrant

Product Details:

• The principle of measurement is based on a sensor
• Paramagnetic sensor with PID temperature control for best in class performance.
• Optional Barometric pressure compensation for purity analysis
• Auto Calibration option
• Large autoranging LED display
• Specific to oxygen
• Excellent Linearity and accuracy

Product Details:

The oxygen detection cell is a high purity, highdensity, stabilised zirconia ceramic. The sensorproduces a voltage signal relative to the oxygenconcentration of the sample gas stream. The cell’slogarithmic output is converted and linearised by ahigh speed microprocessor to provide a direct digitalreadout on the instrument’s LED display

Product Details:

All gases conduct heat at a specific rate, known as the thermal conductivity of the gas. Matched pairs of heated filaments are installed in a large thermal mass detection block, one set in the stable reference gas and the other in the measured sample gas. Each of these detectors form part of a Wheatstone Bridge powered by a constant current source. 

Product Details:

Capable of measuring almost any combination of gases; hydrogen, helium, oxygen, carbon dioxide, methane, carbon monoxide, argon, nitrogen and many others.
With the use of sensitive floating circuits, the thermal conductivity analyser can detect gases down to parts per million levels and up to full concentration. The analyser is pre-programmed for a wide range of sample and reference gases, easily selectable from the simple front panel menu. 

Product Details:

Other Details:

• Digital Indicator with alarms Dual alarm, programmable with volt free C/O contacts
• Digital Indicator with retransmission Fitted with retransmission of the 4-20mA signal
• Digital Indicator with RS232 Fitted with RS232 communication