Potence Controls Pvt. Ltd.

Turner Designs Hydrocarbon Instruments proudly announces the all new dual-channel TD-560 Oil in Water Analyzer. In addition to the optical channel found in the TD-550, suitable for crude and other heavy oils, the TD-560 adds a second channel for detecting lighter hydrocarbons, such as BTEX, gas condensates, gasoline, jet fuel, kerosene, transformer oils, styrene and phenol. The TD-560 offers a greatly enhanced detection range (low ppb to 5000 ppm) over most oil in water analyzers.

Monitoring the fouling tendency of RO Feedwater has long been a challenge. Usually fouling is not noticed until the RO membranes need cleaning, resulting in expensive downtime or worse yet membrane replacement. 

Numerous methods have used to measure the fouling tendencdy of feed waters, including turbidity, particle counting, and manual Silt Density Index (SDI) testing. It is difficult to correlate turbidity and particle counting to membrane fouling since they do not directly measure the fouling or plugging nature of the particles in suspension. Since the manual SDI test measures this plugging tendency, it has proven useful in indicating fouling tendencies.

Application: 

• Large Desalination Projects
• Filtered Water
• RO Feed Water
• Well Water
• Clarified Effluent Samples
• Sea water

Turner Designs Hydrocarbon Instruments is proud to introduce the new standard in grab sample oil in water analysis - the TD 550 and TD-560. The TD-550, which features a greatly enhanced detection range (low ppb to 5000ppm), is well-suited for crude and other heavy oils. The TD-560 includes the same optical channel found in the TD-550 along with a second channel for detecting lighter hydrocarbons, such as BTEX, gas condensates, gasoline, jet fuel, kerosene, transformer oils, Styrene and phenol.

Description:

• Introduces new standard in grab sample oil in water analysis
• Advanced data logging and graphing capabilities
• Large full-color touch screen interface
• Approvals : CE
• Results can be correlated to official lab methods such as USEPA 1664A and ISO 9377-1

Micromac Chromium is a microprocessor controlled Online Analyzer specifically designed for automatic Chromium 6+ monitoring on several types of water matrices.

Description:

• Fully automatic operation
• Long autonomy; low maintenance, low operating cost
• Low reagents consumption; short preparation time; low disposable costs
• Easy operation; plug in analyzer, no special training is required
• Electronics and hydraulics completely separated
• Serial interface for local or remote PC connection (option)

Direct Reading Dsicrete analyzer for Online detection of total Coliforms, Faecal coliforms and E.coli for potable, surface, waste and bathing water monitoring

Robust and reliable
Designed for industrial and environmental on-line applications, ensures the highest level of robustness in the electronics, mechanics and hydraulics components.

Feautres/ Benefits

• Fully automatic operation
• 20 days autonomy, one sample per day, with automatic detection of Total+ E. Coli and faecal coliforms or
• 4o samples autonomy with automatic detection of total +E.coli or, alternatively,Faecal coliforms
• USe of disposable 100ml bottles ensures water sample repesentatives and avoids any cross contamination
• No need of long hydraulics washing using special cleaning solutions
• Automatic generation of local and remote alarms through Ethernet or optional GSM/GPRS remote connection
• Yearly Maintenance

MICROMAC Manganese is a microprocessor controlled On Line analyzer specifically designed for automatic Manganese monitoring on several types of waters matrix.

Other Details:

• Manganese monitoring on several types of waters matrix
• Microprocessor controlled Analyzer
• Rugged and reliable
• Programmable photometer
• Automatic calibration / validation / cleaning
• Touch screen interface
• Low reagent level alarm
• Easy installation and operation

MICROMAC IRON is a microprocessor controlled On Line analyzer specifically designed for automatic iron monitoring on several types of waters matrix.

Other Details:

• Iron monitoring on several types of waters matrix
• Microprocessor controlled Analyzer
• Rugged and reliable
• Programmable photometer
• Automatic calibration / validation / cleaning
• Touch screen interface
• Low reagent level alarm
• Easy installation and operation

Its is a microprocessor controlled Online Analyzer specifically designed for automatic Arsensic monitoring on several types of Water Matrices.

Designed for industrial and Environmental Online applications ensures the highest level of robustness in the electronics, mechanics and hydraulics components. Complete separation between electronics and hydraulics plus a simple and robust LFA* hydraulics allows easy maintenance and long terms reliable operations.

• Fully Automatic Operation
• Long autonomy; low maintenance, low operating cost
• Low Reagents consumption; short preparation time; low disposable costs
• Easy operation; plug in analyzer, no special training is required.
• Electronics and hydraulics completely separated.
• Serial Interface for local o remote PC connection (Option)

Easy To Install The analyzer is delivered after a long and successful series of factory tests ready for installation and setup; it is provided with complete set of spares for start up. To start monitoring is enough to connect reagents, sample line, waste line and power supply.

Automatic Calibration When the Calibration Time interval expires the analyzer performs a Calibration Cycle, storing and checking the new calibrant O. D. If new O.D. exceeds selected limits, an alarm contacts is closed.

Features And Benefit

• Fully automatic operation
• Long autonomy; low maintenance, low operating cost
• Low reagents consumption; short preparation time; low disposable costs Easy operation; plug in analyzer, no special training is required
• Electronics and hydraulics completely separated 
• Serial interface for local o remote PC connection (option)

The determination of sodium in low concentrations in the water-steam cycle is of great importance in power plants. On the one hand, this is due to the fact that the signifi cance of sodium in corrosion processes has become more and more recognized over the last few years. On the other hand, this measurement procedure enables a fast monitoring of a leakage for instance in the condenser or the aperture in a cation fi lter or a mixed bed fi lter. Not least for that reason, the sodium measurement has become increasingly important with revising the VGB-guidelines (S-006 / S-010)

Description:

• Measuring Principle : Ion Selective
• Automatic three-point calibration, adjustable time interval
• Control and monitoring of the adjustable pH value
• Built-in sequencer for up to 6 sample channels
• Additional connection for the measurement of a laboratory sample

Micromac Cyanide is a microprocessor controlled Online Analyzer specifically designed for automatic Cyanide monitoring on several types of water matrices.

Other Details:

• Cyanide monitoring on several types of waters matrix
• Microprocessor controlled Analyzer
• Rugged and reliable
• Programmable photometer
• Automatic calibration / validation / cleaning
• Touch screen interface
• Low reagent level alarm
• Easy installation and operation

Micromac Aluminum is a microprocessor controlled Online analyzer specifically designed for automatic aluminum monitoring on several types of waters matrix.

Features:

• Fully Automatic operation
• Long autonomy; low maintenance, low operating cost.
• Low reagents consumption, short preparation time; low disposable costs
• Easy operation; plug in analyzer, no special training is required
• Electronics and hydraulics completely separated
• Serial interface for local or remote PC connection (option)

Micromac Nickel is a microprocessor controlled Online Analyzer specifically designed for automatic Nickel Monitoring on several types of water matrices.

Other Details:

• Nickel monitoring on several types of waters matrix
• Microprocessor controlled Analyzer
• Rugged and reliable
• Programmable photometer
• Automatic calibration / validation / cleaning
• Touch screen interface
• Low reagent level alarm
• Easy installation and operation

Potence Controls PCTUS Turbidity / TSS System is an excellent choice for a wide range of applications like Urban wastewater treatment ; Sanitation network; Industrial effluent treatment; Surface water monitoring and Drinking water.
Turbidity sensors are optical sensors. The sensor measurement principle is based on the IR light method dispersed at 90° (ISO 7027). The measurement is carried out in the Infrared range.
The sensor is calibrated in the factory, so there is no need to perform calibration during initial commissioning. All data regarding calibration, logs, users and measurements are processed directly in the sensor allowing for extremely reliable and traceable measurements.

The Digox 6.1 is an instrument to measure the concentration of dissolved hydrazine in high purity water by means of amperometry. The Hydrazine is oxidised at a gold electrode, which is in direct contact with the water. Therefore short response times and highest accuracies are ensured.
One of the feature of the Digox 6.1 is its robust sensor which is low maintenance. Due to the modular construction of the instrument, the sensor is easily accessible if it needs to be cleansed or serviced.

Advantages 

• High accuracy, short response time, no drift of the signal

• Robust sensor, low maintenance

It is a microprocessorcontrolled On Line analyzer specifically designed forautomatic Chloride monitoring on several types of watermatrices.
Designed for industrial and Environmental On Lineapplications ensures the highest level of robustness inthe electronics, mechanics and hydraulics components.

• Fully Automatic operation
• Long Autonomy; low maintenance, low operating cost low power consumption
• Low Reagents consumption; short preparation time, low disposable Costs
• Easy operation; plug in analyzer no special training is required
• Serial Interface for local or remote PC connection (option)

Micromac Copper is a microprocessor controlled On Line analyzer specifically designed for automatic Copper monitoring on several types of water matrix. 

Other Details:

• Copper monitoring on several types of waters matrix
• Microprocessor controlled Analyzer
• Rugged and reliable
• Programmable photometer
• Automatic calibration / validation / cleaning
• Touch screen interface
• Low reagent level alarm
• Easy installation and operation

The determination of dissolved silicic acid (ortho-silicate) in the watersteam cycle is of great importance for the operation and plant safety in power plants. In addition to the determination of ortho-silicate in the live steam in order to avoid deposits or crystallisation inside the turbine, it is possible to detect an aperture in the anion filter or mixed bed exchanger.

MICROMAC SULFATE is a microprocessor controlled On Line analyzer specifically designed for automatic sulfate monitoring on several types of water matrix. 

Other Details:

• Industrial Waste Water
• Microprocessor controlled Analyzer
• Rugged and reliable
• Programmable photometer
• Automatic calibration / validation / cleaning
• Free selectable measuring, cleaning and calibration intervals
• Touch screen interface
• Easy installation and operation

Turner Designs Hydrocarbon Instruments has been theworld leader in oil in water monitoring for more than 20years. The TD-120 Oil in Water Monitor was developedbased on our extensive real-world experience and offersUV fluorescence technology with industry leading features.The TD-120 is available with either a standard care packageor custom care package to match the needs of your siteconditions and application. The customer care packagesinclude calibration to known standards or calibration toyour target hydrocarbon, using sample analysis makingyour installation and start-up process trouble free. TheTD-120 is ideal for detection of oil leaks and spills forheat exchangers, boilers, and membrane systems as well asoptimization of water treatment systems.
With low detection limits and greatly extended detectionrange, the TD-120 provides the necessary tools andease of use to meet todays complex oil in water needs.

• Internal table Interface for quick setup and calibration
• New Auto-valve capabilities: temperature protection, fresh water flush and process isolation
• Minimal Maintenance
• Low cost of ownership- no reagents or instrument air needed for operation
• OEM ooportunities

It is a Microprocessorcontrolled On Line analyzer specifically designed forautomatic ammonia monitoring on several types ofwaters matrix.
Designed for industrial and Environmental On Lineapplications ensures the highest level of robustness inthe electronics, mechanics and hydraulics components.

• Fully automatic operation
• Long Autonomy, low maintenance, low operating cost.
• Low reagents;consumption; short preparation time ; low disposable costs.
• Easy operation; plug in analyzer, no special training is required
• Electronics and hydraulics completely separated
• Serial Interface for local or remote PC connection (option)

Potence Controls PC Series combination pH/ORP sensors are designed for special applications. They can be mounted in a flow through Tee / Chamber or Immersed in Tanks or Vessels.
The reference cell is of double-Junction Porous Teflon design comes with a built-in solution Ground owing to which the performance of this sensor is enhanced. The body is made from chemically-resistant Ryton which is suitable for some of the most harsh applications. 

The conductivity in water-steam cycle in power plants is an important measurement.

Other Details:

• No heating up, therefore no gas emissions of other volatile acids
• No inert gas required, air-conditioning by means of a molecular sieve
• Interpolation of measuring results to actual CO2 content
• Automatic shut down of the DAC reactor following the fall below the acceptable limit of 0.2 μS cm-1 (VGB-guideline)
• Short response times

Potence Controls PCTUS Turbidity / TSS System is an excellent choice for a wide range of applications like Urban wastewater treatment ; Sanitation network; Industrial effluent treatment; Surface water monitoring and Drinking water.
Turbidity Sensors are optical Sensors. The Sensor measurement principle is based on the IR Light method dispersed at 90° (ISO 7027). The measurement is carried out in the infrared range.
The sensor is calibrated in the factory, so there is no need to perform calibration during initial commissioning. All data regarding calibration, logs, users and measurments are processed directly in the sensor allowing for extremely reliable and traceable measurements.

Accuracy and safety in the process

The Digox 6.1 measures traces of dissolved oxygen in process water and high-purity water. Both, stationary and portable instruments, are designed for continuous operation in sampling systems for water-steam cycles. Data interfaces, analog signals, alarms and contacts offer a variety of options to integrate the Digox 6.1 into a process control system. The rugged design of the Thiedig sensor with its automatic calibration allows for a nearly maintenance-free continuous operation. The calibration can be performed at any time during the measuring operation or activated in programmable time intervals. Hence, a safe and reliable measurement is always guaranteed.

The Digox Optical is a state-of-the-art oxygen measuring device based on the principle of the dynamic fluorescence Quenching. The device uses neither a membrane nor an electrolyte. Also, the principle is independent of the CO concentration of the sample and 2 the sample flow. Additional features are a low maintenance and a longer uptime. 

Features:

• Simultaneous measurement of dissolved oxygen, temperature and sample flow

• Easy installation, low maintenance and a long period of operation
• Analogue and digital outputs Profibus communication (option)

• Integrated Flowmeter

Other Details

The Digox Optical is a state-of-the-art oxygen measuring device based on the principle of the dynamic fluorescence Quenching. The device uses neither a membrane nor an electrolyte. Also, the principle is independent of the CO concentration of the sample and 2 the sample flow. Additional features are a low maintenance and a longer uptime. A blue light source excites a luminophore in the sensor cap. Electrons of the luminophore absorb the energy of the incident blue light and are transferred to a higher energy level. Within a very short time (Microseconds) the electrons revert to lower energy levels and the energy is released in form of a red light. Oxygen is able to take over the energy of the excited electrons of the luminophore and the intensity of the emitted red light is a function of the oxygen concentration in the sample. Also, the presence of oxygen molecules accelerates the process of the electrons for leaving the higher energy level. The intensity of the emitted red light and the fading time of the red light are a function of the oxygen concentration in the sample. The resulting life period of the emitted red light directly indicates the oxygen concentration in the sample.

Potence Controls PC2000 series DUAL CHANNEL Analyzers for pH/ORP/Conductivity/TDS measurements incorporate state of the art technology to provide flexible and reliable solutions to the customer for their Process Monitoring and Control needs. Any two of the measurements from pH / Redox (ORP) / Conductivity / Total Dissolved Solids (TDS) can be freely selected for use with the PC2000 Analyzer via software, thus reducing the need of individual dedicated controllers; the PC2000 can be picked up off the shelf and can be used for any 2 of the above measurements.

Potence Controls PC2000 series DUAL CHANNEL Analyzers for pH/ORP/Conductivity/TDS measurements incorporate state of the art technology to provide flexible and reliable solutions to the customer for their Process Monitoring and Control needs. Any two of the measurements from pH / Redox (ORP) / Conductivity / Total Dissolved Solids (TDS) can be freely selected for use with the PC2000 Analyzer via software, thus reducing the need of individual dedicated controllers; the PC2000 can be picked up off the shelf and can be used for any 2 of the above measurements.

Description:

• Principle : Reagent free Amperometric measurement
• Long life with replacable membrane cap and refillable gel electrolyte.
• Automatic temperature-compensated output.
• Factory calibrated, No Zero calibration required.

Potence Controls PC Series combination pH / ORP sensors are designed for special applications. They can be mounted in a Flow through Tee / Chamber or Immersed in Tanks/ Vessels.
The reference cell is Double -Junction porous teflon design and comes with a built-in solution Ground owing to which the perfomrance of this sensors is enhanced. The body is made from chemically- resistant Ryton which is suitable for some of the most Harsh Applications.
The sensors are rated for 0-105°C, 100psig andcome with a standard 15 feet cable.
The sensors also comes with a choice of Temparature elements like Pt 100, Pt 1000, other elements available on request. 
These sensors can be connected to most of the different brands of Transmitters / Controllers.

PC series sensors Different Configuarations:

• Dome shaped
• High Purity
• Detachable Cable
• Insertion Type with Retractable options.

Micromac Sulfide is a microprocessor controlled Online Analyzer specifically designed for automatic sulfide monitoring on several types of waters matrix.

Other Details:

• Industrial Waste Water
• Microprocessor controlled Analyzer
• Rugged and reliable
• Programmable photometer
• Automatic calibration / validation / cleaning
• Free selectable measuring, cleaning and calibration intervals
• Touch screen interface
• Easy installation and operation

Features & Benefits• Four-Channel Analyzer.• Measures any two of DO, Chlorine, Turbidity, TSS &Measures an y two of pH, ORP, Conductivity, TDS.• 4.3" Backlit Touch-Screen Display.• Guided Calibration Procedures.• 4 x 4-20 mA Isolated Outputs.• 5 Relay Outputs.• RS485 Modbus Digital Communication.• Non-Volatile Memory.• Real Time Clock• Data Logging• USB Connection for Data Download• Wall / Pipe mounting• IP 65 Enclosure

Potence Controls PC Series combination pH / ORP sensors are designed for special applications. They can be mounted in a Flow through Tee / Chamber or Immersed in Tanks/ Vessels. The reference cell is Double -Junction porous teflon design and comes with a built-in solution Ground owing to which the perfomrance of this sensors is enhanced. The body is made from chemically- resistant Ryton which is suitable for some of the most Harsh Applications. The sensors are rated for 0-105?C, 100psig andcome with a standard 15 feet cable. The sensors also comes with a choice of Temparature elements like Pt 100, Pt 1000, other elements available on request. These sensors can be connected to most of the different brands of Transmitters / Controllers. PC series sensors Different Configuarations: Dome shaped High Purity Detachable Cable Insertion Type with Retractable options.

Potence Controls PC Series combination pH / ORP sensors are designed for special applications. They can be mounted in a Flow through Tee / Chamber or Immersed in Tanks/ Vessels.The reference cell is Double -Junction porous teflon design and comes with a built-in solution Ground owing to which the perfomrance of this sensors is enhanced. The body is made from chemically- resistant Ryton which is suitable for some of the most Harsh Applications.The sensors are rated for 0-105°C, 100psig andcome with a standard 15 feet cable.The sensors also comes with a choice of Temparature elements like Pt 100, Pt 1000, other elements available on request. These sensors can be connected to most of the different brands of Transmitters / Controllers.
PC series sensors Different Configuarations:Dome shapedHigh PurityDetachable CableInsertion Type with Retractable options.

Potence Controls PC2000 series DUAL CHANNEL Analyzers for pH/ORP/Conductivity/TDS measurements incorporate state of the art technology to provide flexible and reliable solutions to the customer for their Process Monitoring and Control needs. Any two of the measurements from pH / Redox (ORP) / Conductivity / Total Dissolved Solids (TDS) can be freely selected for use with the PC2000 Analyzer via software, thus reducing the need of individual dedicated controllers; the PC2000 can be picked up off the shelf and can be used for any 2 of the above measurements.

Potence Controls PC2000 series DUAL CHANNEL Analyzers for pH/ORP/Conductivity/TDS measurements incorporate state of the art technology to provide flexible and reliable solutions to the customer for their Process Monitoring and Control needs. Any two of the measurements from pH / Redox (ORP) / Conductivity / Total Dissolved Solids (TDS) can be freely selected for use with the PC2000 Analyzer via software, thus reducing the need of individual dedicated controllers; the PC2000 can be picked up off the shelf and can be used for any 2 of the above measurements.