Potence Controls Pvt. Ltd.
Vikhroli West, Mumbai, Maharashtra
GST No. 27AAGCP7095P1ZH
TrustSEAL Verified
Call 0804896923279% Response Rate
SEND EMAIL
Product Details:
| Usage/Application | Industrial |
| Brand | Potence |
| Memory | Battery Backup |
| Sensor Accuracy | +- 0.5 % |
| Sensor Resolution | 0.01 mg/l or ppm |
| Sensor Response Time | 90% value in less than 60 seconds |
| Sensor Cable | Standard 15 meter |
| Operating Conditions | -20 to 55C |
| Calibration Methods | 2 Point Calibration |
| Measurement Principle | Luminescent optical technology |
| Max. Pressure | 5 Bar |
| Power Requirement | 110 VAC / 230 VAC; +/- 10%; 50 / 60Hz |
| Enclosure Mounting | Wall,Panel |
| Measurement | 2 digital Sensor Inputs |
| Relays | 3 Electromechanical SPST; 6A; 250 VAC Max |
| Controller Type | P,PI and ON/OFF Controller |
| Enclosure | IP 65 |
| Sensor Working Temp. Range | 0 to 50 DegreeC |
Product Details:
| Brand | Potence |
| Response Time | 90 percent value in less than 60 Seconds |
| Accuracy | +/- 0.5 percent |
| Relays Operational Mode | Control |
| Analog Output Function | Retransmission |
| Enclosure Rating | IP 54 |
| Enclosure Dimension | H*W*D ( 48*96*75 ) mm |
| Salinity Compensation | Provided |
| Enclosure | ABS |
| Analog Output Signal | 4-20 mA ; Max. Load 600 Ohms |
| Sensor Cable | std. 15 meters |
| Measurement Range | 0.00 to 20.00 mg/l or 0.00 to 20.00 ppm or 0.0 to 200 percent |
| Connections | 1"NPT(M) front and back fittings |
| Display | Seven Segment LED Display |
| Power Requirements | 90- 270 VAC ; 50 / 60 Hz |
| Relays | Electromechanical SPDT ; 10A ; 115 / 230 VAC |
| Wetted Material | SS 316L / Titanium Body |
| Input Power | 24 VDC |
| Resolution | 0.1 mg/l or ppm |
Potence Controls Optical Dissolved Oxygen sensors measure Dissolved Oxygen with great accuracy in waste water plants. They can connect to any existing measurement systems that accept a 4-20 mA input. This feature reduces the loop cost drastically as you can use any off the shelf Indicator and configure to measure Dissolved Oxygen.
Product Details:
| Usage/Application | Industrial |
| Brand | Potence |
| Enclosure | IP 65 |
| Calibration Methods | 2 Point Calibration |
| Controller Type | P, PI and ON/OFF Controller |
| Display Type | Backlit LCD Screen 4*20 Characters ; 5 Directional Keys |
| Power Requirements | 110 VAC / 230 VAC ; +- 10% ; 50 / 60 Hz |
| Memory | Battery Back up |
| Storage Conditions | -20 to 65 DegreeC |
| Analog Output Signal | 2 Nos. ; 0 / 4-20 mA Isolated ; Max. Load 500 Ohms. |
| Dimensions | H*W*D (160*165*85) |
| Operating Conditions | -20 to 55 DegreeC |
| Relays | 3 Nos. ; Electromechanical SPST ; 6 A ; 250 VAC Max. |
| Measurement | 2 Nos. ; Digital Sensor Inputs |
Potence Controls PCODOS Optical Dissolved Oxygen System is an excellent choice for an accurate measure in all situation with wide range of applications like Urban wastewater treatment; Industrial effluent treatment. Surface water monitoring , Sea water monitoring, Fish farming, Aquarium and Drinking water. The Optical Dissolved Oxygen sensor is based on Luminescent optical technology.
Product Details:
| Brand | Potence |
| Automation Grade | Automatic |
| Display Type | Seven Segment LED Display |
| Relays | Electromechanical SPDT ; 10A ; 115 / 230 VAC |
| Power Requirements | 90- 270 VAC ; 50 / 60 Hz |
| Relays Operational Mode | Control |
| Enclosure | IP 54 |
| Enclosure Dimension | H*W*D ( 48*96*75 ) mm |
| Cut-Out | 44*92 mm |
| Analog Output Signal | 4-20 mA ; Max. Load 600 Ohms |
| Analog Output Function | Retransmission |
Potence Controls Optical Dissolved Oxygen sensors measure Dissolved Oxygen with great accuracy in waste water plants.
Affordable as you do not have to rely on any specific controllers.
· 4-20mA output from sensor enables seamless connectivity to field transmitters or PLC/DCS.
· No electrolyte solution to replenish.
· Replaceable sensor cap.
· No calibration or replacement sensor cap for at least 1 year in most applications.
· Saltwater compensation.
· Sample flow not necessary for measurement accuracy.
· The sensor come with a choice of PVC body or SS 316 body version.
· Sensor cable length up to 100 meters allow flexibility in the field.
Product Details:
| Usage/Application | Industrial |
| Resolution | 0.01 mg/l or ppm |
| Accuracy | +- 0.5 % |
| Measurement Range | : 0.00 to 20.00 mg/l or 0.00 to 20.00 ppm or 0.0 to 200 % |
| Response Time | 90% value in less than 60 seconds |
| Analog Output Signal | 2 Nos. ; 0 / 4-20 mA Isolated ; Max. Load 500 Ohms. |
| Power Requirements | 110 VAC / 230 VAC ; +- 10% ; 50 / 60 Hz |
| Wetted, Body Material | SS (316L) / Titanium Body |
| Working Temp. Range | 0 to 50 DegreeC |
| Display Type | Backlit LCD Screen 4*20 Characters ; 5 Directional Keys |
| Storage Conditions | -20 to 65 DegreeC |
| Operating Conditions | -20 to 55 DegreeC |
| Measurement Principle | Luminescent optical technology |