Potence Controls Pvt. Ltd.
Mumbai, Maharashtra
GST No. 27AAGCP7095P1ZH
TrustSEAL Verified
Call 0804896923269% Response Rate
SEND EMAIL
Product Details:
| Temperature Range | Display visibility temperature range 10 DegreeF (-12 DegreeC) to 158 DegreeF (70 DegreeC |
| ACCURACY | 0.5% of full range span, at room temperature |
| REPEATABILITY | 0.1% of full range span |
| AMBIENT OPERATING: | -40 DegreeF to 160 DegreeF |
| ENCLOSURE AND COVER | Type 4X/IP66 certified epoxy-coated aluminum alloy 360 |
| DISPLAY RESPONSE TIME: | 400 mS (2.5 Hz) |
| POWER INPUT/ | 2-Wire 8-50 VDC discrete input powered 750 uA (max) |
| LONG-TERM STABILITY: | +-0.25% of range/year maximum |
| TEMPERATURE DRIFT: | 0.03% of full scale per DegreeC (0.12% for the K10 range) |
| SWITCH RESPONSE TIME | Change of Output response 60 mS 16.7 Hz |
Product Details:
| Ambient Temperature | -40 Degree to 160 DegreeF (-40 to 71 DegreeC); set point typically shifts less than 1% of range for a 50 DegreeF |
| Weight | Approx. 1 lb., 8 oz. (0.68 kg.) |
| Switch output | One SPDT; switch may be wired "normally open" or "normally closed" |
| Vibration | Set point repeats after 2.5 G, 5-500 Hz |
| Pressure connection | All models 1/4" NPT (female) except models S126B-S164B: 1/2" NPT (female) |
| Set point repeatability | Models S126B-S164B, 126-364, 680: +- 1% of adjustable range; models 610-614: +- 1.5% of adjustable ran |
| Shock | Set point repeats after 15 G, 10 millisecond duration |
| Enclosure | Die cast aluminum, epoxy powder coated, gasketed; captive cover screws |
| Enclosure classification | Designed to meet Enclosure Type 4X requirements |
The J6 Series pressure switch is ideally suited for a wide range of industrial processes such as alarm/shutdown and low/high service pressures. OEMs also utilize the J6 Series switch in machinery and equipment for threshold protection.
Product Details:
| Ambient Temperature | -40 Degree to 160 DegreeF (-40 to 71 DegreeC); set point typically shifts less than 1% of range for a 50 DegreeF |
| Weight | Approx. 1 lb., 8 oz. (0.68 kg.) |
| Vibration | Set point repeats after 2.5 G, 5-500 Hz |
| Switch output | One SPDT; switch may be wired "normally open" or "normally closed" |
| Pressure connection | All models 1/4" NPT (female) except models S126B-S164B: 1/2" NPT (female) |
| Set point repeatability | Models S126B-S164B, 126-364, 680: +- 1% of adjustable range; models 610-614: +- 1.5% of adjustable ran |
| Shock | Set point repeats after 15 G, 10 millisecond duration |
| Enclosure | Die cast aluminum, epoxy powder coated, gasketed; captive cover screws |
| Enclosure classification | Designed to meet Enclosure Type 4X requirements |
The J6 Series pressure switch is ideally suited for a wide range of industrial processes such as alarm/shutdown and low/high service pressures. OEMs also utilize the J6 Series switch in machinery and equipment for threshold protection.
Product Details:
| Ambient Temperature | -40 Degree to 160 DegreeF (-40 to 71 DegreeC); set point typically shifts less than 1% of range for a 50 DegreeF |
| Weight | Approx. 1 lb., 8 oz. (0.68 kg.) |
| Switch output | One SPDT; switch may be wired "normally open" or "normally closed" |
| Enclosure | Die cast aluminum, epoxy powder coated, gasketed; captive cover screws |
| Shock | Set point repeats after 15 G, 10 millisecond duration |
| Set point repeatability | Models S126B-S164B, 126-364, 680: +- 1% of adjustable range; models 610-614: +- 1.5% of adjustable ran |
| Vibration | Set point repeats after 2.5 G, 5-500 Hz |
| Pressure connection | All models 1/4" NPT (female) except models S126B-S164B: 1/2" NPT (female) |
| Enclosure classification | Designed to meet Enclosure Type 4X requirements |
The J6 Series pressure switch is ideally suited for a wide range of industrial processes such as alarm/shutdown and low/high service pressures. OEMs also utilize the J6 Series switch in machinery and equipment for threshold protection.
Product Details:
| Ambient Temperature | -40 Degree to 160 DegreeF (-40 to 71 DegreeC); set point typically shifts less than 1% of range for a 50 DegreeF |
| Weight | Approx. 1 lb., 8 oz. (0.68 kg.) |
| Set point repeatability | Models S126B-S164B, 126-364, 680: +- 1% of adjustable range; models 610-614: +- 1.5% of adjustable ran |
| Enclosure classification | Designed to meet Enclosure Type 4X requirements |
| Pressure connection | All models 1/4" NPT (female) except models S126B-S164B: 1/2" NPT (female) |
| Shock | Set point repeats after 15 G, 10 millisecond duration |
| Switch output | One SPDT; switch may be wired "normally open" or "normally closed" |
| Vibration | Set point repeats after 2.5 G, 5-500 Hz |
| Enclosure | Die cast aluminum, epoxy powder coated, gasketed; captive cover screws |
The J6 Series pressure switch is ideally suited for a wide range of industrial processes such as alarm/shutdown and low/high service pressures. OEMs also utilize the J6 Series switch in machinery and equipment for threshold protection.
Product Details:
| Ambient Temperature | -40 Degree to 160 DegreeF (-40 to 71 DegreeC); set point typically shifts less than 1% of range for a 50 DegreeF |
| Weight | Approx. 1 lb., 8 oz. (0.68 kg.) |
| Enclosure | Die cast aluminum, epoxy powder coated, gasketed; captive cover screws |
| Pressure connection | All models 1/4" NPT (female) except models S126B-S164B: 1/2" NPT (female) |
| Vibration | Set point repeats after 2.5 G, 5-500 Hz |
| Set point repeatability | Models S126B-S164B, 126-364, 680: +- 1% of adjustable range; models 610-614: +- 1.5% of adjustable ran |
| Shock | Set point repeats after 15 G, 10 millisecond duration |
| Enclosure classification | Designed to meet Enclosure Type 4X requirements |
| Switch output | One SPDT; switch may be wired "normally open" or "normally closed" |
Product Details:
| Shock | Set point repeats after 15 G, 10 millisecond duration |
| Vibration | Set point repeats after 2.5 G, 5-500 Hz |
| Electrical rating | 15 A 125/250/480 VAC resistive. Electrical switches have limited DC capabilities. Consult factory |
| Weight | 3-8 lbs. Varies with type and model |
| Enclosure | Die cast aluminum, epoxy powder coated; gasketed; cover lock; internal set point lock standard |
| Switch output | One SPDT; switch may be wired "normally open" or "normally closed" |
| Ambient Temperature | -58 to 160 DegreeF (-50 to 71 DegreeC); models 36-39, 520-525, 540-548, 701-705, 15834-15839 |
| Set point repeatability | Temperature models: Type B, C and F: +-1% of full scale range Type E: +-2% of full scale range |
| Pressure connection | Models S126B-S164B, 171-194, 483-494, 520-535 |
| Electrical connection | Type H, B, E; one 3/4" NPT E/C; type J, C, F, 820E, 822E; two 3/4" NPT E/C; terminal block standard |
| Enclosure classification | Certified to enclosure type 4X. Class I, Division 1 product meets enclosure type 7; Class II, Divisi |
As safety requirements become more stringent, the determining factor in specifying an industrial pressure, differential pressure, and/or temperature SIL2-certified switch rests upon that switch protecting equipment, processes, and personnel. Meeting hazardous location requirements through worldwide approvals and certifications, UE’s 120 Series is the choice where potentially explosive or highly corrosive atmospheres exist.
The 120 Series SIL2-certified switch offers a variety of pressure, vacuum, differential pressure, and temperature ranges, as well as process connections, wetted materials, and sensor types. With a common flexible platform, models can quickly be adapted at the factory for special requirements such as ranges, process connections, and electrical ratings. Typical industries using the 120 Series SIL-certified switch include chemical, petrochemical, refinery, oil and gas production and transmission, and pharmaceuticals.
Product Details:
| Shock | Set point repeats after 15 G, 10 millisecond duration |
| Vibration | Set point repeats after 2.5 G, 5-500 Hz |
| Switch output | One SPDT; switch may be wired "normally open" or "normally closed" |
| Ambient Temperature | -58 to 160 DegreeF (-50 to 71 DegreeC); models 36-39, 520-525, 540-548, 701-705, 15834-15839 |
| Set point repeatability | Temperature models: Type B, C and F: +-1% of full scale range Type E: +-2% of full scale range |
| Electrical rating | 15 A 125/250/480 VAC resistive. Electrical switches have limited DC capabilities. Consult factory |
| Weight | Approx. 1 lb., 8 oz. (0.68 kg.) |
| Electrical connection | Type H, B, E; one 3/4" NPT E/C; type J, C, F, 820E, 822E; two 3/4" NPT E/C; terminal block standard |
| Pressure connection | Models S126B-S164B, 171-194, 483-494, 520-535 |
| Enclosure | Die cast aluminum, epoxy powder coated, gasketed; captive cover screws |
| Enclosure classification | Designed to meet Enclosure Type 4X requirements |
As safety requirements become more stringent, the determining factor in specifying an industrial pressure, differential pressure, and/or temperature SIL2-certified switch rests upon that switch protecting equipment, processes, and personnel. Meeting hazardous location requirements through worldwide approvals and certifications, UE’s 120 Series is the choice where potentially explosive or highly corrosive atmospheres exist.
The 120 Series SIL2-certified switch offers a variety of pressure, vacuum, differential pressure, and temperature ranges, as well as process connections, wetted materials, and sensor types. With a common flexible platform, models can quickly be adapted at the factory for special requirements such as ranges, process connections, and electrical ratings. Typical industries using the 120 Series SIL-certified switch include chemical, petrochemical, refinery, oil and gas production and transmission, and pharmaceuticals.
Product Details:
| Weight | 3-8 lbs. Varies with type and model |
| Switch output | One SPDT; switch may be wired "normally open" or "normally closed" |
| Electrical connection | Type H, B, E; one 3/4" NPT E/C; type J, C, F, 820E, 822E; two 3/4" NPT E/C; terminal block standard |
| Vibration | Set point repeats after 2.5 G, 5-500 Hz |
| Enclosure | Die cast aluminum, epoxy powder coated; gasketed; cover lock; internal set point lock standard |
| Electrical rating | 15 A 125/250/480 VAC resistive. Electrical switches have limited DC capabilities. Consult factory |
| Pressure connection | Models S126B-S164B, 171-194, 483-494, 520-535 |
| Ambient Temperature | -58 to 160 DegreeF (-50 to 71 DegreeC); models 36-39, 520-525, 540-548, 701-705, 15834-15839 |
| Set point repeatability | Temperature models: Type B, C and F: +-1% of full scale range Type E: +-2% of full scale range |
| Shock | Set point repeats after 15 G, 10 millisecond duration |
| Enclosure classification | Certified to enclosure type 4X. Class I, Division 1 product meets enclosure type 7; Class II, Divisi |
As safety requirements become more stringent, the determining factor in specifying an industrial pressure, differential pressure, and/or temperature SIL2-certified switch rests upon that switch protecting equipment, processes, and personnel. Meeting hazardous location requirements through worldwide approvals and certifications, UE’s 120 Series is the choice where potentially explosive or highly corrosive atmospheres exist.
The 120 Series SIL2-certified switch offers a variety of pressure, vacuum, differential pressure, and temperature ranges, as well as process connections, wetted materials, and sensor types. With a common flexible platform, models can quickly be adapted at the factory for special requirements such as ranges, process connections, and electrical ratings. Typical industries using the 120 Series SIL-certified switch include chemical, petrochemical, refinery, oil and gas production and transmission, and pharmaceuticals.
Product Details:
| ENCLOSURE | 316 stainless steel |
| SWITCH OUTPUT | Code S: One SPDT, hermetically sealed. Code D: Two SPDT for DPDT action, hermetically sealed. Availa |
| ELECTRICAL RATINGS | Code H: 5 A at 125/250 VAC, 5 A resistive and 3 A inductive at 28 VDC. Silver contacts Code L: 1 A a |
| Ambient Temperature | -58 to 176 DegreeF (-50 to 80 DegreeC); Sensor Type K: 0 DegreeF to 160 DegreeF (-18 DegreeC to 71 DegreeC). |
| Set point repeatability | Temperature models: +-1% of adjustable range REPEATABILITY Pressure models: Sensor types 2, P: +-1.5% |
| SHOCK | Differential pressure and temperature models: set point repeats after 15 G's, 10 millisecond |
| VIBRATION | Differential pressure and temperature models: Set point repeats after 2.5 G's, 10-2000 Hz. Pressure |
Product Details:
| Operating Temperature | -58 to 176 DegreeF (-50 to 80 DegreeC); Sensor Type K: 0 DegreeF to 160 DegreeF (-18 DegreeC to 71 DegreeC). |
| Shock | Differential pressure and temperature models: set point repeats after 15 G's, 10 millisecond duratio |
| Vibration | Differential pressure and temperature models: Set point repeats after 2.5 G's, 10-2000 Hz. |
| SWITCH OUTPUT | Code D: Two SPDT for DPDT action, hermetically sealed. Available for pressure models only. |
| Temperature Deadband | Typically 2% of range under laboratory conditions |
| Pressure Connection | 1/2" NPT (female) or 1/4" NPT (female) |
| ENCLOSURE | 316 stainless steel |
| Enclosure Classification | Certified to Enclosure Type 4X Class I, Division 1 product meets enclosure Type 7; |
Product Details:
| TEMPERATURE DRIFT: | 0.03% of full scale per DegreeC (0.12% for the K10 range) |
| SWITCH RESPONSE TIME | 16.7Hz |
| ENCLOSURE AND COVER | Type 4X/IP66 certified epoxy-coated aluminum alloy 360 |
| POWER INPUT/ | 2-Wire 8-50 VDC discrete input powered 750 uA (max) |
| Accuracy | 0.5% of full range span, at room temperature |
| REPEATABILITY | 0.1% of full range span |
| AMBIENT OPERATING: | -40 DegreeF to 160 DegreeF |
| LONG-TERM STABILITY: | +-0.25% of range/year maximum |
Product Details:
| Weight | Approx. 1 lb., 8 oz. (0.68 kg.) |
| Ambient Temperature | -40 Degree to 160 DegreeF (-40 to 71 DegreeC); set point typically shifts less than 1% of range for a 50 DegreeF |
| Vibration | Set point repeats after 2.5 G, 5-500 Hz |
| Shock | Set point repeats after 15 G, 10 millisecond duration |
| Set point repeatability | Models S126B-S164B, 126-364, 680: +- 1% of adjustable range; models 610-614: +- 1.5% of adjustable ran |
| Switch output | One SPDT; switch may be wired "normally open" or "normally closed" |
| Enclosure classification | Designed to meet Enclosure Type 4X requirements |
| Enclosure | Die cast aluminum, epoxy powder coated, gasketed; captive cover screws |
| Pressure connection | All models 1/4" NPT (female) except models S126B-S164B: 1/2" NPT (female) |
The J6 Series pressure switch is ideally suited for a wide range of industrial processes such as alarm/shutdown and low/high service pressures. OEMs also utilize the J6 Series switch in machinery and equipment for threshold protection.
Product Details:
| POWER INPUT/ | 2-Wire 8-50 VDC discrete input powered 750 uA (max) |
| AMBIENT OPERATING: | -40 DegreeF to 160 DegreeF |
| LONG-TERM STABILITY: | +-0.25% of range/year maximum |
| TEMPERATURE DRIFT: | 0.03% of full scale per DegreeC (0.12% for the K10 range) |
| ACCURACY | 0.5% of full range span, at room temperature |
| CONDUIT | 1/2"NPT female SS fitting on left side and a plastic plug on right side field reversible |
| TEMPERATURE RANGE | Display visibility temperature range 10 DegreeF (-12 DegreeC) to 158 DegreeF (70 DegreeC) |
| DISPLAY RESPONSE TIME: | 400mS (2.5Hz) |
| REPEATABILITY | 0.1% of full range span |