PH Conductivity Controller

Product Details:

Potence Controls PC2000 series Dual Channel Analyzers for pH/ORP/Conductivity/TDS measurements incorporate state of the art technology to provide flexible and reliable solutions to the customer for their Process Monitoring and Control Needs. Any two of the measurements from pH/Redox (ORP)/ Conductivity/ Total Dissolved solids (TDS) can be freely selected for use with the PC2000 Analyzer via software, thus reducing the need of indiviudal dedicated controllers, the PC 2000 can be picked up off the shelf and can be used for any 2 of the above measurements.

The Analyzer is suitable for all types of Mounting such as Wall, Pipe, and Panel. The Simple keypad and logical menu structure make the PC2000easy to use. All stored parametersand calibration data are retained in the Non- Volatile Memory in case of Power Failure. All these and several more features make this Analyzer very useful product for both OEMS and End Users alike.

Product Details:

Potence Controls pH / ORP transmitter is a loop-powered 4 to 20mA transmitter with a wide range of useful features and programmable options. The 2 wire design comes with Input to output isolation ensures crisp claer signal transmission in noisy environments. User friendly and very reliable transmitter comes with a large LCD which displays measured pH/ORP and temperature simultaneously. Offset adjustment function allows user to adjust the readings conveniently without removing the sensor from the process media. Two buffer choices are available in two point calibration mode. The 4-20mA output is scalable in pH or mV units. All stored parameters ad calibration data are  retained in then Non- Volatile memory during transmitter power down or power loss. The PCpH 100 can be used for wall mounting, panel mounting. 

The case meets NEMA and IP 65 Ratings.

• Large LCD Display
• Primary and Secondary display for simulatenous display of selected Parameter and Temperature.
• Offset adjustment function.
• Isolated 4-20 mA Output.
• Scalable 4-20 mA Current output.
• Non-Volatile Memory.

Product Details:

Potence Controls PC1000 series Analyzer for pH/ORP/Conductivity/TDS measurements incorporates the latest technology to provide highly reliable, flexible, feature packed device that satisfies a diverse range of process monitoring and control applications. Measurements such as pH / Redox (ORP) or Conductivity / Total Dissolved Solids (TDS) are freely selectable via software thus reducing the need of individual dedicated controllers, the PC1000 can be picked up off the shelf and can be used for any of the above measurements.

Product Details:

Potence Controls PC Series pH Controller model pH100P is a versatile instrument with a wide range of useful featuresand programmable options. The Controller is suitable for use by both OEMS and End Users alike. The measured values include pH and Temperature. With built-in Auto Temp. Compensation, the measured pH Values are accurate to the decimal. With two nos. of 4-20mA outputs and 2 relays, it caters to the basic requirements of the OEMS as well as the end user   

Product Details:

Potence Controls PC Series pH Controller model pH100P is a versatile instrument with awide range of useful features and programmable options. The controller is suitable for use by both OEMS and End Users alike. The measured values include pH and Temperature. With built-in Auto Temp. Compensation, the measured values are accurate to the decimal. With two nos. of 4-20mA outputs and 2 relays, it caters to the basic requirements of the OEMS as well as the End user. User friendly Menu structure, Diagnostics like pH Sensor open and state of the art OLED display for bad light conditions makes the pH100P a preferred choice for front end operator. The outputs are scalable for pH and Temperature and can be freely programmed over the entire range. All stored parameters and calibration data are retained in the Non-volatile memory during power outrages. All these and several more features make the pH100P a very useful products for both OEMS and End users alike.  

Product Details:

Potence Controls PC Series pH Controller model pH100P is a versatile instrument with a wide range of useful features and programmable options. The Controller is suitable for use by both OEMS and End users alike. The measured values include pH and Temperature. With built-in Auto Temp. Compensation, the measured pH Values are accurate to the decimal. With two nos. of 4-20mA Outputs and 2 relays, it caters to teh basic requirements of the OEMS as well as the End user. User friendly Menu structure, Diagnostics like pH Sensor open and state of the art OLED display for bad light conditions makes the pH100P a preferred choice for front end operator. The outputs are scalable for pH and Temperature and can be freely programmed over the entire range. All Stored parameters and calibration data are retained in the Non-Volatile memory during power Outages. All these and several more features make the pH100P a very useful product for both OEMS and End Users alike. 

Product Details:

Potence Controls PC Series pH Controller model pH100P is a versatile instrument with a wide range of useful features and programmable options. The controller is suitable for use by both OEMS and End users alike. The measured values include pH and Temperature. With Built-in Auto Temp. Compensation, the measured pH Values are accurate to the decimal. With two nos. of 4-20mA outputs and 2 relays, it caters to the basic requirements of the OEMS as well as the End user. 

Product Details:

Potence Controls PC1000 series Analyzer for pH/ORP/Conductivity/TDS measurements incorporates the latest technology to provide highly reliable, flexible, feature-packed device that satisfies a diverse range of process monitoring and control applications. Measurements such as pH/ Redox (ORP) or Conductivity / Total Dissolved Solids (TDS) are freely selectable via software thus reducing the need of individual dedicated controllers, the PC1000 can be picked up off the shelf and can be used for any of the above measurements.
The Large Backlit display has been designed to operate in all types of Environments and provides information on Main Measured Value and Temperature simultaneously. PC1000 not only measures but provides Retransmission via 2 nos of 4-20mA Outputand RS-485 Digital communication. 

The Panel mounted analyzer is suitable for use by both OEMS and End Users alike. The simple keypad and logical menu structure make the PC1000 easy to use. All stored Parameters and calibration data are retained in the Non Volatile memory in case of Power Failure.

Additional Information:

• Delivery Time: EX STOCK