Potence Controls Pvt. Ltd.
Vikhroli West, Mumbai, Maharashtra
GST No. 27AAGCP7095P1ZH
TrustSEAL Verified
Call 08048076739
91% Response Rate
SEND EMAIL
Product Details:
| Measurement | pH/ORP or Conductivity or Total Dissolved Solids (TDS) (Freely selectable via software) |
| Display | Graphic LCD with Backlit display |
| Display Dimension | 60*30 mm |
| Power Requirements | 100 - 270 VAC +-10%, 50/60 Hz |
| Operating Conditions | Temperature : 0 - 65 DegreeC, RH - 0-95% Non-condensing |
| Storage Conditions | Temperature : 0 - 75 DegreeC |
| Analog Output Signal | Two Nos 4 to 20 mA isolated current outputs max 600 ohms |
| Analog Output Function | Retransmission |
| Relays | Two Nos. electromechanical SPDT ; 10A ;115/230 VAC |
| Relays Operational Mode | Control and Alarm |
Product Details:
| Measurement Method | Continuous 2-stream respiration measurement |
| Bacteria Culture | Original Activated Sludge |
| Measurement Range | BOD: 1 - 50 mg/l, 1 - 200,000 mg/l ASR: 0 - 5 mg/l/min |
| Response Time | min. 3 - 4 minutes (application dependent) |
| Housing | IP 54 |
| Inflow and Outflow | 30 mm ID tube or threaded, 32 mm OD or as specified |
| Power Supply | 230 / 115 V~, 50 / 60 Hz, 100 VA |
| Analogue Output | 0/4-20 mA |
| Serial Interface | RS 232, Combined alarms, Life-Zero, USB 2.0 |
| Remote Control | Through TCP/IP Protocol (Internet) |
LAR’s BioMonitor is an online BOD analyzer for the determination of biochemical oxygen demand (BOD), respiration and toxicity in waste water. Using BioMonitor, operators can control their waste water treatment plant in an optimal way.
FEATURES AND BENEFITS
Product Details:
| Measurement Method | Continuous 2-stream respiration measurement |
| Bacteria Culture | Original Activated Sludge |
| Measurement Range | BOD: 1 - 50 mg/l, 1 - 200,000 mg/l ASR: 0 - 5 mg/l/min |
| Response Time | min. 3 - 4 minutes (application dependent) |
| Housing | IP 54 |
| Inflow and Outflow | 30 mm ID tube or threaded, 32 mm OD or as specified |
Product Details:
| Measurement Method | Continuous 2-stream respiration measurement |
| Bacteria Culture | Original Activated Sludge |
| Measurement Range | BOD: 1 - 50 mg/l, 1 - 200,000 mg/l ASR: 0 - 5 mg/l/min |
| Response Time | min. 3 - 4 minutes (application dependent) |
| Housing | IP 54 |
| Inflow and Outflow | 30 mm ID tube or threaded, 32 mm OD or as specified |
| Power Supply | 230 / 115 V~, 50 / 60 Hz, 100 VA |
| Analogue Output | 0/4-20 mA |
| Serial Interface | RS 232, Combined alarms, Life-Zero, USB 2.0 |
| Remote Control | Through TCP/IP Protocol (Internet) |
Product Details:
| Storage Temperature | -54 to 71 DegreeC |
| AMBIENT TEMPERATURE LIMITS | -40 to 71 DegreeC; models 520-525, 540-548, 700-706, 15731-15736 |
| SHOCK | Set point repeats after 15 G, 10 millisecond duration |
| VIBRATION | Set point repeats after 2.5 G, 5-500 Hz |
| ENCLOSURE | Die cast aluminum, epoxy powder coated, gasketed, captive cover screws |
| ENCLOSURE CLASSIFICATION | Enclosure type 4X |
| SWITCH OUTPUT | One SPDT snap action switch; switch may be wired "normally open" or "normally closed" |
The 100 Series is a cost-effective, SIL-certified switch for pressure, vacuum, differential pressure, and temperature applications in process plants and OEM equipment. The rugged, one-piece enclosure features a slanted cover for wiring accessibility.
A wide variety of microswitch and process-connection options make this versatile, SIL-certified switch ideal for applications requiring a rugged weather-proof device.
Typical applications that utilize the 100 Series are heat tracing, freeze protection, processing equipment (pumps, compressors), inputs for annunciator panels, and fire suppression systems.
Product Details:
| Storage Temperature | -54 to 71 DegreeC |
| AMBIENT TEMPERATURE* | -40 to 71 DegreeC; models 520-525, 540-548, 700-706, 15731-15736 |
| SHOCK | Set point repeats after 15 G, 10 millisecond duration |
| VIBRATION | Set point repeats after 2.5 G, 5-500 Hz |
| ENCLOSURE | Die cast aluminum, epoxy powder coated, gasketed, captive cover screws |
| Enclosure classification | Enclosure type 4X |
| Switch Output | One SPDT snap action switch; switch may be wired "normally open" or "normally closed" |
The 100 Series is a cost-effective, SIL-certified switch for pressure, vacuum, differential pressure, and temperature applications in process plants and OEM equipment. The rugged, one-piece enclosure features a slanted cover for wiring accessibility.
A wide variety of microswitch and process-connection options make this versatile, SIL-certified switch ideal for applications requiring a rugged weather-proof device.
Typical applications that utilize the 100 Series are heat tracing, freeze protection, processing equipment (pumps, compressors), inputs for annunciator panels, and fire suppression systems.
Product Details:
| Ambient Temperature | 0 to 160 DegreeF (-18 to 71 DegreeC) with Buna-N construction; 0 to 180 DegreeF (-18 to 82 DegreeC |
| Max media Temperature | 200 DegreeF (93 DegreeC) with Buna-N sensor; 250 DegreeF (121 DegreeC) with Viton sensor |
| Shock | Set point repeats after 50 G, 10 millisecond duration |
| Vibration | Set point repeats after 10 G, 5-500 CPS |
| ENCLOSURE CLASSIFICATION | Termination Types C, D, E, and G: Enclosure Type 4. Termination Type F: IP65. Types A & B: Not appli |
| SWITCH OUTPUT | One SPDT |
Product Details:
| Weight | 3-8 lbs. Varies with type and model |
| Storage Temperature | -65 to 160 DegreeF (-54 to 71 DegreeC) |
| AMBIENT TEMPERATURE LIMITS | -58 to 160 DegreeF (-50 to 71 DegreeC); models 36-39, 520-525, 540-548, 701-705, 15834-15839 |
| SET POINT REPEATABILITY | Temperature models: Type B, C and F: +-1% of full scale range Type E: +-2% of full scale range |
| Shock | Set point repeats after 15 G, 10 millisecond duration |
| VIBRATION | Set point repeats after 2.5 G, 5-500 Hz |
| ENCLOSURE | Die cast aluminum, epoxy powder coated; gasketed; cover lock; internal set point lock standard on ty |
| ENCLOSURE CLASSIFICATION | Certified to enclosure type 4X. Class I, Division 1 product meets enclosure type 7; Class II, Divisi |
| SWITCH OUTPUT | One or two SPDT; dual switch may be separated up to 100% of range; except type 822E where switch #2 |
| PRESSURE CONNECTION | Models S126B-S164B, 171-194, 483-494, 520-535 |
| TEMPERATURE INDICATION | Temperature indication available types 820E and 822E. Indication accuracy is +-1% of adjustable range |